Large Knobbly Display Bowl

This large display bowl has been created by laminating together four identical plywoods, a fifth blond plywood to add contrast was laminated to the inside of the base then carved around by hand in a random design to add a quirky and unique eye catching pattern. 


This is probably the most difficult piece I have had to sand so far with most of the detail being sanded by hand.
The finished result was well worth the effort though, an incredibly tactile bowl that makes you want to roll a marble around the inside like one of those children's toys !

Item No. 3121     19" diameter x 3" deep     12.5" diameter base     1.8 kg 

The base design as you will see from the pictures is not only carved into the darker timber by approximately 6mm but also raised above the base in a contrasting blond timber by approximately 6mm giving a pattern relief of 12mm between peaks and valley's. 

There is also a slight recess running around the exterior of the bowl to create a shallow carrying lip.

At over 1.5ft diameter this would make an unmissable centre piece for a larger dining table or as a display bowl in a hotel / catering environment. 

Finished with four coats of Linseed / Tung oil mix giving a subtle satin effect. This fruit bowl is food safe and extremely heat resistant.

As with all WeirdWood art pieces each item is absolutely unique with its own identifying number stamped on the reverse.

Handmade at the WeirdWood workshop in Staffordshire using only renewable energy produced 'on site'.  

This item and many other original pieces can be viewed and purchased from:   http://weirdwood.mysupadupa.com/  

Flower patterned Fruit Bowl

A good example here of how the symmetrical lines of plywood can be distorted by carving into the flat surface, this just finished fruit bowl turned out with a flower pattern by happy accident.


15" x 2.25"     1.6 kg

The eight deep lines of fluting running from the rim to the centre of the bowl has the effect of distorting the otherwise perfectly circular lines of the plywood into a flower effect. 

The exterior sides of the bowl are gently convexed down to a substantial base of 7" in diameter giving this piece great stability. 

This item and many other original pieces can be viewed and purchased from:   http://weirdwood.mysupadupa.com/ 

Square Fluted Fruit Bowl

This square bowl really catches the eye due to the subtle fluting travelling down from each corner which gets deeper as it reaches the centre of the bowl, this has the effect of distorting the otherwise symmetrical lines of the plywood as though the bowl is being 'pinched' from underneath.


Square Fluted Fruit Bowl.
Item No. 1123.    13" x 13" x 2" (330mm x 330mm)    Base: 5.5" x 5.5" (140mm x 140mm)    1.3kg

Hand Crafted by laminating together three layers of plywood, with the top layer a subtly lighter wood to form the rim.

Finished with four coats of Linseed / Tung oil mix giving a subtle satin effect. This fruit bowl is food safe and extremely heat resistant.

As with all WeirdWood art pieces each item is absolutely unique with its own identifying number stamped on the reverse.
Handmade at the WeirdWood workshop in Staffordshire using only renewable energy produced 'on site'. 

This item and many other original pieces can be viewed and purchased from:   http://weirdwood.mysupadupa.com/

WeirdWood gone squiggly

I'm really pleased with the effect achieved with this large square fruit / display bowl, with a random pattern carved into the base and gentle fluting into the corners accentuated by the shine of the deep satin lustre.


Square Squiggly Fruit Bowl 

18" x 18" x 3" (457mm x 457mm) 

Base:   8.5" x 8.5" (215mm x 215mm) 

A large display bowl with a random squiggle design carved into the bottom. 
This bowl is hand crafted using four pieces of quality plywood laminated together with layers one and four being a subtly lighter shade of timber to highlight the rim and base design. A graduated fluting effect runs from each corner down into the base where it turns into a random pattern 8mm deep. 

At 1.5ft square this would make an unmissable centre piece for a larger dining table or as a display bowl in a hotel / catering environment. 

Finished with four coats of Linseed / Tung oil mix giving a subtle satin effect. This fruit bowl is food safe and extremely heat resistant. 

As with all WeirdWood art pieces each item is absolutely unique with its own identifying number stamped on the reverse. 

Handmade at the WeirdWood workshop in Staffordshire using only renewable energy produced 'on site'. 

This item plus many more functional art inspired pieces can be viewed and purchased at:  http://weirdwood.mysupadupa.com/    :)

The Bowl of Confusion

I had real fun making this one, although it was a bit time consuming. Using two types of plywood, one a blond soft wood the other dark hard woods, this bowl has been constructed with each of the four layers alternating in style and orientation.

Layer One has been left in it's normal flat alignment as an impressive blond rim to the bowl.

Layer Two, a darker wood has been cut into strips, turned 90 degrees then re-laminated to create an 'edge on' effect.

Layer Three was achieved by cutting the ply into short blocks and re-laminating them back into a 'herring bone' pattern.

Layer Four had the plywood cut into strips then laminated back together with every other strip set on edge.

The picture below depicts well the overall effect with layer three being my personal favourite as the herring bone construction gives the illusion of the timber bending as it turns the corner of the bowl.

13" x 9" x 3.25"


Finished with four coats of linseed / tung oil mix this fruit / salad bowl is food safe and extremely heat resistant.


This item is for sale along with many other WeirdWood creations and can be found at:  http://weirdwood.mysupadupa.com/   

Tapio Wirkkala Creation

These bowls by Tapio Wirkkala makes you think about the whole issue of what an item is worth ! Valued at  $17,000 each !!!

I suppose being a famous designer in the first place helps and they are nice bowls, but hey, they are not even particularly large pieces !!!

If you have ever visited the Metropolitan Museum of Art, New York, the Victoria & Albert Museum, London, Stedelijk Museum, Amsterdam, The National Museum of Modern Art, Tokyo, or the Smithsonian Institution, Washington DC, or if you plan to in the near future, look out for Tapio Wirkkala's creations. The Finnish artist was revered for some of the most well crafted wooden bowls created between 1951 and 1954. One such experiment with birch plywood resulted in these beautiful tailor made bowls. What makes this bowl unique is the crafting technique. Just like handloom woven fabrics, these bowls are made by setting dark and light strips of the plywood to give out a dramatic effect.

The overall effect reminds you of a wooden leaf with its veins intact. Sporting a hole at one end, this beautiful bowl was a personal gift presented by the designer Tapio Wirkkala to Edward Wormley. The bowl is 13.75inches long and 7.5inches wide. Each piece is priced at $17,000.

Rustic Oak Bowl

This gorgeous oak bowl I carved from an ancient English Oak I cleared from a village just a few miles from my workshop. Rough carved over 18 months ago and then left to 'season' before the final shaping. The bowl was sanded down the grades to a 180 grit paper, then 'saturated' six times with pure Tung oil.

The finished result is absolutely stunning with a myriad of patterns for the eye to feast on, a heavy weight chunky rustic bowl, slightly elliptical with a medieval non-symmetrical feel.

13" Long x 10.5" Wide x 5" High (3" deep inside)    2.5 Kilograms

It's farm house table, It's country cottage, It's hobbit home. I'm so impressed with this one I can't bear to part with it .....well .....not unless I get a very good offer  :)

For more bowls or mirrors on sale visit my shop on Folksy.com

David

Large Oval 'Checker' Fruit Bowl

Newly listed in my Folksy shop is this huge fruit bowl. I've been playing around with the orientation of the layers of plywood with this one and am very pleased with the results.

The next bowl will have a 'herring bone' pattern in one layer  :)

10811

23.5" Long x 12" Wide x 3.25" High         Weight 1.7kg

This Large Oval fruit bowl has been carved from four layers of plywood laminated together, one layer has been sliced then stood on edge in a checker pattern near the top of the bowl to create an eye catching effect before lamination.

Finished with four coats of Tung and Linseed oil mix, to a high gloss.

This bowl is 'food safe' due to the natural oils used to finish and extremely heat resistant.
A very unusual 'talking point' as a table display on a larger dinning table or side board.